Fatigue Property Mapping 2.0

Fatigue Property Mapping Logo

We have just launched a few updates to our Fatigue Property Mapping service offerings.  The changes were:

  1. Addition of the all new Reliability Module for those needing to compute probability of failure in addition to fatigue life. The module gives you Weibull parameters to describe the statistical distribution of crack precursor sizes in your material.
  2. Addition of a pressure-volume test as an optional add-on to the hyperelastic module. Use this add-on when your rubber is loaded under high confinement to the point where its compressibility must be treated more accurately.  If the hydrostatic pressure is more than 5% of the bulk modulus, then this option makes sense.
  3. Split of the original Thermal Module in two components: a Basic Thermal Module and an Advanced Thermal Add-on Module. The Basic Thermal Module provides a dynamic strain sweep to quantify dissipation (for use in computing temperature distribution via FEA) and also provides the temperature sensitivity coefficient on the crack growth rate law.  The advanced module provides thermal transport properties (conductivity, specific heat), thermal expansion coefficient (for computing thermal pre-stresses), and additional data points for the dissipation and crack growth rate laws.
  4. Split of the original Extended Life (Ageing) Module into two parts: a Basic Ageing Module and a Master Curve Module. The basic module includes characterization of unaged and aged samples for stiffness, critical fracture energy, and intrinsic strength.  The oven exposure time and temperature for the aged sample is specified by the client, or can be set by Endurica based upon a client-specified life target.  The Full Master Curve Module gives both the Arrhenius law activation energy and a master curve showing how stiffness, critical fracture energy and intrinsic strength depend on exposure time and temperature.

Most prices have remained the same, except for the Thermal and Ageing modules.  The Thermal and Ageing modules have now been significantly streamlined, so that we now offer service at a lower price.

The new price list and specifications can be found here.

twitterlinkedinmail
close
Trial License RequestTrial License RequestTrial License RequestTrial License RequestTrial License Request